Learn how to sew on badges by hand or by machine

by admin on 2018/09/21

When you wish to liven up a garment, accessory, luggage piece or even hats you could sew on badges to get the fresh look easily Www.trainingcollar.com
. Badges or patches when placed strategically can immediately change the look of a garment or accessory and take it from boring to spunky within just a few minutes. If you’ve got children and they keep earning badges of merit you would want to sew them on. However, as intimidating as it might sound, sewing on badges isn’t very difficult when you know how you can get it done.

To do this procedure for sewing on a badge, begin with placing the badge over the place for which you desire it. Now secure the badge well with a few pins so it stays in place and doesn’t shift when you’re sewing it on. So if you are putting the patch over a garment, you ought to fix the patch and then try the garment on to make certain that the patch or the badge looks right in the place. If your patch needs a little readjustment you can accomplish it at this stage easily.

Now thread the needle making sure that the thread that you are using isn’t very long. Keep your thread on a length of approximately 18inches for simple maneuvering. In case your thread is just too long then you might get bothered by knots. Once you have the thread ready make a knot at the end of the thread. It is possible to thread a needle manually by holding the non knotted end between your forefinger and thumb after which passing it in the eye of the needle. You could also take the assistance of a needle threader if you find threading a needle in this manner difficult.

Pass the needle through the badge and also the fabric being sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you began stitching keeping this distance from your last stitch constantly. Continue stitching around the entire perimeter of the badge till you have completely finished stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread by way of a single stitch. Pull the thread strongly to secure the knot and then cut off any excess thread that is left. Lastly remove the excess safety pins that you were using to secure the patch into position.

You may as well sew on badges with the aid of a sewing machine in case you don’t want to do the same by hand. Select a thread that matched the hue of your patch and then tread your machine. You may as well choose a contrasting color with regards to the look that you want to present your badge. Once this is achieved you ought to start sewing you badge. Use the surface of the badge for your starting position and sew all along the edge of your badge using the regular stitch mode ending at your beginning point. Once done, cut the extra thread that connects the badge to the machine and your garment is ready for usage with the badge.

Comments on this entry are closed.

Previous post:

Next post: