Making Embroidered Iron on Patches

by admin on 2018/03/28

There was a period when embroidered iron on patches were used to generally hide holes that could have happened over a dress. Nevertheless with a certain amount of creativity and imagination you can make use of this patch and put an element of spunk and style to any outfit you decide on. It’s not only clothes on which you may use these patches but these embroidered iron on patches can be used to decorate bags, shoes, pillows, upholstery, hat’s�the list can be as limitless as your imagination.

If you wish to come up with tailored patches then you can readily build-it-yourself. You can get all the materials that you need easily at stores where you can acquire premade patches. The greatest advantage of utilizing an iron on patch is that you could spend all the time you wish to in doing them but need to spend very little time linking them.

You’ve got to have your materials available just before you start making your patch. But before you get your resources think of the design of the patch that you’d like to produce. When you have the layout made to size you need to sketch or trace exactly the same to the cloth. Just be sure you don’t embroider the style onto the cloth without having the hoop in order that the completed pattern comes out flat. Now put a tear away backing sheet on the wrong side of the patch and connect the embroidery ring in position so the design is taut. It’s also possible to use some backing spray to amend your backing paper in position.

Now you may start off embroidering your iron on patch. Make sure that your thread is not longer than two feet at some point so that you could embroider easily and don’t have to worry about unwanted tangles and knots. Now embroider across the design making sure that you start out each length of the thread from the back of the design so that the knots or extra lengths don’t appear in the front of the pattern.

Once you have completed embroidering your patch take it out of the hoop and take away the backing paper by tearing it off lightly. Try taking a little iron on sticky paper and cut it to the exact same size of your patch. Now set up your patch face down upon an ironing board and set the iron on adhesive patch glue side down on your patch. Get a fresh section of cloth or paper towel over the sheet. Set your iron on to the low configuration and iron the adhesive onto the patch. It’s also possible to make use of the silk setting on your iron. The paper towel or rag will make sure that none of the glue gets stuck in your iron.

Your embroidered iron on patches could be available to make use of as soon as you complete this step. Now all you need to do is peel off the paper backing the adhesive at the rear of the patch, put it where you choose to put it and iron it firmly in position. Iron the cloth back to front to ensure the adhesive gets properly activated and helps to keep the patch in place.

Comments on this entry are closed.

Previous post:

Next post: